View SG564020_4565495.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

S/GRA/SG5xxxxx/A/13/03/2000
RELAIS STATIQUE MONOPHASE A COMMANDE PROPORTIONNELLE / RELAY WITH PROPORTIONAL CONTROL
page 1 /5 F/GB
SG5
10 or 40 A 230 or 400 VAC
CONTROLE EN TRAIN D'ONDES PAR PERIODES ENTIERES / FULL WAVE PULSE CONTROLLER
0 - 10V / 0 - 5V / 4 - 20mA
Ce relais possede une entree analogique isolee du secteur permettant de faire varier proportionnellement a cette entree, le rapport cyclique de fonctionnement d'une charge. La commande est synchrone au reseau et ne comporte que des periodes entieres . Cette famille de relais s'adapte a de nombreuses caracteristiques : - Tension de reseau : 230V ou 400V (50 ou 60Hz) - Courant de charge : 10A , 40A. - Entree analogique : 0 a 10 V, 4 a 20 mA, 0 a 5V ou potentiometrique (3eme borne disponible) This range of relays has an analog input isolated from the mains, provided to vary the cyclic working ratio of a load proportionally to the input. The control is synchronous with the mains and has only full periods. This family of relays can be adapted to many characteristics: - Main voltage : 230V or 400V (50 or 60Hz) - Load current : 12A , 40A. - Analog input : 0 to 10 V, 4 to 20 mA , 0 to 5V or potentiometer (with third output available)
REFERENCE
39,5
OUTPUT VOLTAGE
OUTPUT CURRENT
CONTROL
Application:
MAIN 50HZ
L1 L2
SG541020 SG541120
115 - 253VAC 115 - 253VAC 115 - 253VAC 115 - 253VAC 115 - 253VAC 200 - 440VAC 200 - 440VAC 200 - 440VAC
12A 12A 12A 40A 40A 40A 40A 40A
0-10V 0/5V or Potentiometer 4-20mA 0-10V 0/5V or Potentiometer 0-10V 0/5V or Potentiometer 4-20mA
Potentiometer from 10K to 100K
10 to 100K celduc France
82,7
SG541420 SG544020
LINE
230V 50Hz
4,4
+
INPUT 0 - 10 VDC
LINE
230V 50Hz
celduc France
SG541020
FULL WAVE PULSE CONTROLLER
SG544120
FULL WAVE PULSE CONTROLLER
10A
LOAD
40 73,5
SG544120 SG564020 SG564120 SG564420
+
40A
LOAD
cycle Time
-
91 100
Cycle time adjust
Load
Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Resistance interne / Input internal resistor fig.1 External potentiometer INPUT Symbol SGxxx0xx SGxxx4xx SGxxx1xx Unit Uc 0-10V 0-7V 0-5V/pot V Ic 0,04 @10V 4-20 @7V 0,005 @5V mA Rc 250 0,35 1000 K 10-100 K 2500 2500 4000 VRMS VRMS V
Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui Isolement sortie-semelle/Output-case isolation @500m Ui Tension assignee Isolement/Rated impulse voltage Uimp Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Conditions
Symbol
Typ. 360 -40 / +100 -25 / +85
Unit g C C
Proud to serve you
All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis.
celduc
r e l a i
s
S/GRA/SG5xxxxx/A/13/03/2000
Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Symbol SG541xxx SG544xxx SG561xxx SG564xxx Tension de charge / Load voltage Ue 230 230 400 400 Plage tension de fonctionnement / Operating range Uemin-max 115-253 115-253 200-440 200-440 Tension crete / Peak voltage Up 600 600 1200 1200 Protection RC-VDR RC-VDR RC-VDR RC-VDR Niveau de synchonisation / Synchronizing level Usync 12 12 12 12 Tension d'amorcage / Latching voltage Ua 8 8 8 8 Courant nominal AC-51/ AC-51 nominal current Ie AC-51 12 12 40 40 Courant de surcharge non repetitif /Non repetitive overload current Itsm 120 120 350 350 Chute tension directe crete/ On state voltage drop Vd 1,6 1,6 1,6 1,6 Courant de fuite etat bloque/ Off state leakage current ( @ue) Ilk <3 <3 <3 <3 Courant de charge minimum / Minimum load current Ie min 5 5 5 5 Plage de frequence / Operating frequency range f 45-66 45-66 45-66 45-66 dv/dt etat bloque / Off state dv/dt dv/dt 200 200 200 200 dI/dt maximum non repetitif/ Maximum di/dt non repetitive di/dt 50 50 50 50 I2t (<10ms) I2t 72 72 612 612 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter SGxxx0xx SGxxx4xx 0-10V 4-20mA Commande /control
2s +/- 20% so 100 cycle at 50 Hz
page 2 / 5 F/GB
Unit V rms V rms V V V A rms A V mA mA Hz V/s A/s A2s
SGxxx1xx 0-5V
SGxxx1xx pot 10k
SGxxx1xx pot 100k
de 2 a 9s +/- 20% suivant le reglage du potentiometre integre From 2 to 9s +/20% according to the setting position of the integrated trimmer
2s +/- 20% soit 100 periodes a 50 Hz 2s +/- 20% so 100 cycle at 50 Hz
Temps de cycle /cycle time
de 2,3 a 10,6s +/- de 0,9 a 4,1s +/- 20% 20% suivant le regla- suivant le reglage du ge du potentiometre potentiometre integre integre From 0,9 to 4,1s +/From 2,3 to 10,6s +/- 20% according to the 20% according to the setting position of the setting position of the integrated trimmer integrated trimmer
Precision /precision Linearite /linearity
-2 /+1 period 1 period
-2 /+1 period 1 period
-2 /+1 period 1 period
-2 /+1 period 1 period
-2 /+1 period 1 period
Caracteristiques de transfert entree/sortie / Input/output transfer characteristics
Exemple pour une commande en 0-10V: t/T = Ve x 10 (Ve en Volts - t/T en % ) T = periode t = temps de conduction exemple : Ve = 0 Volt t/T = 0% Ve = 5 Volts t/T = 50% Ve = 10 Volts t/T = 100% Example with a 0-10V control: t/T = Ve x 10 (Ve in Volts - t/T in % ) T = period t = conduction time example : Ve = 0 Volt t/T = 0% Ve = 5 Volts t/T = 50% Ve = 10 Volts t/T = 100%
Load voltage
t T
celduc
r e l a i s
www.celduc.com
Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19
S/GRA/SG5xxxxx/A/13/03/2000
page 3 / 5 F/GB
SG5xx0xx SG5xx4xx
+Vcc
Supply
Schema equivalent / Equivalent wiring
+Vcc N Main P Trimmer for cycle time on the SSR +
Photocouple Led
SG5xx1xx
Supply
N Main
P
fixed period
Ramp
Synchro. Transformer CR Q D S
Ramp +Vcc + -
Synchro. Transformer CR Q D S
+
+
Analog input
-
10K to 100K
Photocoupler Led
0-10V model 4-20mA model
Caracteristiques thermiques / Thermal curves :
Pdmoy (W) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3
0-5V /pot model
Load Load
440VAC
5C/W
4C/W
Tcase max (C) 85 87,5 0C/W
2C/W
10A RELAY
240VAC 90C
SANS RADIATEUR 4 5 6 7 8 9 10 I (A) 0 10 20 30 40 50 60 70 80 90 100 110 120125 Tamb (C)
Tcase max (C) 65 1,2C/W 1,5C/W 85 2C/W 0,7C/W 0,4C/W 0C/W Pdmoy (W) 60 55 50 45
1C/W
Caracteristiques thermiques / Thermal curves :
0,9C/W
75
40A RELAY
40 35 30 25 20 15 10 5 0 0 5 10 15 20 25 30 35 40 I (A) 0 10 20 30 40 50 60 70 80 90 100 110 120125 Tamb (C) SANS RADIATEUR 4C/W
celduc
r e l a i s
www.celduc.com
Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19
90C
S/GRA/SG5xxxxx/A/13/03/2000
page 4 / 5 F/GB
Caracteristique de courant de surcharge max. (ITSM) / Max. overload current characteristic (ITSM):
Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 10A(Itsm=120A) / Surge current : Itsm (Apeak) = f(t) for 10A models with Itsm =120A 150 Itsm (Apeak) 100
Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied
10A RELAY
50
Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied.
0 0,01
0,1 t(s)
1
10
Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 40A(Itsm=350A) Surge current : Itsm (Apeak) = f(t) for 40A models with Itsm =350A 400 Itsm (Apeak) 300 200 100 0 0,01
Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied.
40A RELAY
0,1 t(s)
1
10
1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais.
1 -No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's .
Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge.
Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains.
celduc
r e l a i s
www.celduc.com
Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19
S/GRA/SG5xxxxx/A/13/03/2000
page 5 / 5 F/GB
Application en triphase / Three phase application. SG5 + 1 relais triphase entree AC ou 3 relais monophases entree AC SG5 + 1 Three phase SSR with AC control or 3 One pole SSRs with AC input . Puissance jusqu'a 3x125A sous 400VAC Power up to 3x 125A and 400VAC
MAINS 230V 50HZ OR 400V 50HZ
230V 50HZ
FUSES...
SG5
+
celduc France
INPUT 0 - 10 VDC ou 4-20mA -
MAINS 230V 50Hz 10A LOAD
SGT celduc
France
RELAIS TRI SGT6
230VAC
INPUT 90-240 VAC
1 TRI or 3 MONO
3 PHASE SSR
LOAD IN STAR OR DELTA
celduc
r e l a i s
www.celduc.com
Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19

▲Up To Search▲

Price & Availability of SG564020

	To Download SG564020 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .